Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
LCC |
Number of Pins |
20 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
BROADSIDE VERSION OF 373 |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
15 ns |
Turn On Delay Time |
15 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.032 A |
High Level Output Current |
-12mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.54mm |
Length |
8.9mm |
Width |
8.9mm |
Thickness |
1.52mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
54FCT573TLB Overview
In the LCC package, it is embedded. It is designed with 8 bits. A device such as this has 20 terminations designed. The device is operated when the supply voltage is set to 5V. 20 pins are provided. In terms of electronic devices, this one is in the FCT family. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports. There are 5V power supplies attached to it. Optimal efficiency requires 5V as the supply voltage. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. It has been set to 32mA for the low level output current. There is -12mA high level output current set. There should be a temperature below 125°C at which the system is operating. In order for the system to operate properly, the operating temperature should be higher than -55°C. There is a maximum voltage of 5.5V supported. This device requires a minimum voltage of 4.5V. It uses the logic IC BUS DRIVER.
54FCT573TLB Features
LCC package
8 Bits
20 pin count
20 pins
5V power supplies
54FCT573TLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT573TLB Latches applications.
- Relay
- Parallel Input
- Automotive Infotainment
- Frequency dividing
- Decade counting
- Parallel-to-Serial Data Conversion
- A/D and D/A conversion
- Sample and hold register
- Data acquisition
- Parallel data synchronization