54FCT574ATLB
| Parameters | |
|---|---|
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 7.2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -12mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.52mm |
| Length | 8.9mm |
| Width | 8.9mm |
| Thickness | 1.52mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
54FCT574ATLB Overview
As a result, it is packaged as LCC. Currently, there are 20 terminations. A voltage of 5V is used as the power supply for this D latch. A device of this type belongs to the family of FCT. Electronic part Surface Mountis mounted in the way. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 8bits in this flip flop. An electrical current of 5V volts is applied to it. The flip flop contains 2ports. Optimal efficiency requires a supply voltage of 5V. In terms of quiescent current, it consumes 10μA . In addition, you can refer to the additinal BROADSIDE VERSION OF 374 of the D latch. -12mA is set as the high level output current. It is set to 32mAfor the low level output current. There should be a temperature below 125°Cduring operation. If the operating temperature is higher than -55°C, the system should operate properly. Initially, it requires a voltage of 4.5V as the minimum supply voltage. A maximum voltage of 5.5V can be provided by it. BUS DRIVERis used as the logic IC in this D flip flop. It is equipped with 1 functions . With 20 pins, it is equipped with a low power consumption.
54FCT574ATLB Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
54FCT574ATLB Applications
There are a lot of Integrated Device Technology (IDT) 54FCT574ATLB Flip Flops applications.
- Buffer registers
- Dynamic threshold performance
- ESD protection
- Reduced system switching noise
- ATE
- Buffered Clock
- Supports Live Insertion
- High Performance Logic for test systems
- Bus hold
- Load Control
