557GI-03LF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 25MHz |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 2.97V |
| Operating Supply Current | 78mA |
| Nominal Supply Current | 78mA |
| Frequency (Max) | 200MHz |
| Input | Clock |
| Primary Clock/Crystal Frequency-Nom | 25MHz |
| PLL | Yes |
| Max Duty Cycle | 55 % |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
557GI-03LF Overview
As part of the packaging, there is a serial number TSSOP associated with the product. There are 16 terminations in it. Clock program provides 3.3V volts. To run 260, we use the peak reflow temperature of this part. There are 1 on the device. normaloperation can occur at a frequency of 200MHz. Of the part, there are 2003 publications. Circuits application is recommended to mount Circuits application wCircuits applicationh Surface Mount. On this device, there are 16 pins. There are 16 pins 16 this board. The minimum working temperature of this device cannot be lower than -40°C. Under 85°C degrees Celsius, the operating temperature should be maintained. 3.3V is the recommended supply voltage. A 2 output can be maintained on the device. Voltage 3.63V is used for this part. Circuits application is important to maintain a voltage on the device that is greater than 2.97V. A supply current of 78mA is usually sufficient to operate this DAC. The system is capable of excellent efficiency when working at 25MHz.
557GI-03LF Features
Peak Reflow Temperature (Cel): 260
Include 1 Circuits
with 16 Pins
operate supply voltage at the range of 3.3V
557GI-03LF Applications
There are a lot of Integrated Device Technology (IDT) 557GI-03LF application specific timer?applications.
- Ethernet Switches, Routers
- Residential gateways
- OTN Muxponders and Transponders
- Routers
- Broadcast Video
- Communications
- GbE/10 GbE/100 GbE Synchronous Ethernet (ITU-T G.8262)
- Print Imaging
- Test and Measurement
- Broadcast video
