567UER6R3MEF
| Parameters | |
|---|---|
| Min Operating Temperature | -55°C |
| Voltage - Rated | 6.3V |
| Capacitance | 560μF |
| Lead Pitch | 2.4892mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 300mOhm |
| Polarity | Polar |
| Ripple Current | 4.7A |
| Life (Hours) | 5000 hours |
| Height Seated (Max) | 8.9916mm |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
The capacitance can run at the range of 560μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 567UER6R3MEF capacitor Illinois Capacitor 567UER6R3MEF is suitable to conduct the ripple current at 4.7A. 567UER6R3MEF Capacitor is mounted by Through Hole. There are 2 terminals embeded in 567UER6R3MEF Capacitor. Voltage - Rated often has values of 6.3V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 560μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 567UER6R3MEF Aluminum Polymer Capacitors.
Typically, 567UER6R3MEF is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Spot Welding
- Frequency Converters
- UPS Buffering
- To reduce power noise & signal noise
- Coupling or blocking
- Motor Control
- Power Factor Correction
- Computer motherboards
- Smoothing Noise Filtering
- Flashtube Ignition
