5962-87719012A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Power Dissipation | 450mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD625 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 5 |
| Number of Circuits | 1 |
| Power Dissipation | 450mW |
| Current - Supply | 5mA |
| Slew Rate | 5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | ±18V |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.65MHz |
| Screening Level | MIL-STD-883 Class B |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Length | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-87719012A Overview
Packaging for the buffer amplifier is in the form of a 20-CLCC case. An op amp of this type is a Instrumentation-type. Upon delivery, op amp ic is packaged in a Tube case. There have been a total of 20 terminations over the past year. Buffer amplifier has a total of 20 pins on it. This linear amplifier should be powered by an 15V battery. A total of 20 pins are present on the instrumentation amplifier. The input offset voltage is 50μV. For this electronic part, it is recommended that you mount it with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . A linear amplifier like this has 1 circuits on it. The linear amplifier consists of 5 different elements in total. In order to ensure optimal performance, an 5mA supply is recommended for this electrical component. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 1. In order for the buffer amplifier resistance to remain within the 1GOhm range, the device should be tested.
5962-87719012A Features
20 Pins
supply voltage of 15V
Resistance of 1GOhm
5962-87719012A Applications
There are a lot of Analog Devices Inc. 5962-87719012A Instrumentational OP Amps applications.
- Voltage regulation circuit
- Video amplifiers
- Band-pass filter
- Displayers for aircraft and air transportation control systems
- Micro signal measurement
- Communication
- Non-polarized electrodes
- Professional videography
- Addition operation circuits
- E-book readers
