5962-8771901EA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Power Dissipation | 450mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD625 |
| Pin Count | 16 |
| Qualification Status | Qualified |
| Number of Elements | 5 |
| Number of Circuits | 1 |
| Power Dissipation | 450mW |
| Current - Supply | 5mA |
| Slew Rate | 5V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | ±18V |
| Input Offset Voltage (Vos) | 50μV |
| Gain Bandwidth Product | 25MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 0.65MHz |
| Screening Level | MIL-STD-883 Class B |
| Dual Supply Voltage | 15V |
| Voltage Gain-Min | 1 |
| Voltage Gain-Nom | 10 |
| Height | 2.41mm |
| Length | 20.32mm |
| Width | 7.37mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8771901EA Overview
Op amp is packaged in 16-CDIP (0.300, 7.62mm) case. Buffer amps of this type are called Instrumentation-types. In the case of Tube cases, linear amplifier will be delivered. There have been a total of 16 terminations over the past year. The pins on this board total to 16 in total. It is important to remember that this op amp should be operated at a voltage of 15V volts. It has 16 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 50μV. For this electronic part, it is recommended that you mount it with type Through Hole. With regard to operating temperature, op amp ranges -55°C~125°C. This op amp ic has 1 circuits. There are 5 elements in this buffer amplifier. To run supply current of buffer amplifier under 5mA. There are a maximum of 1 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. It is recommended to keep the instrumentation amplifier resistance within the range of 1GOhm.
5962-8771901EA Features
16 Pins
supply voltage of 15V
Resistance of 1GOhm
5962-8771901EA Applications
There are a lot of Analog Devices Inc. 5962-8771901EA Instrumentational OP Amps applications.
- Gaming industry
- MP3
- Multimedia playback equipment
- pH (acidity)
- High/low-pass filter circuit
- High speed sample
- Weighing systems
- Division circuits
- Band-pass filter
- Switching amplifier
