5962-8777101MCA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-CERDIP |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Base Part Number | OP400 |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 20V |
| Nominal Supply Current | 2.9mA |
| Quiescent Current | 725μA |
| Current - Supply | 600μA |
| Slew Rate | 0.15V/μs |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 750pA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Input Offset Voltage (Vos) | 80μV |
| Bandwidth | 500 kHz |
| Gain Bandwidth Product | 500kHz |
| Voltage Gain | 141.58dB |
| Power Supply Rejection Ratio (PSRR) | 140dB |
| Voltage - Input Offset | 40μV |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 3V |
| Dual Supply Voltage | 18V |
| Input Voltage Noise Density | 22nV/sqrt Hz |
| Number of Amplifiers | 4 |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8777101MCA Overview
It is packaged in an 14-CDIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. Buffer amps of this type are called General Purpose-types. A Tube case is used for delivering the op amp. 14 pins are available on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 80μV voltage. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C TA for optimal performance. Op amp is a member of the 141.58dB's 141.58dB family. On this buffer amplifier, there are 4 circuits. As far as the device is concerned, buffer amplifier has 4 channels. In order for op amp to function properly, the temperature should not be lower than -55°C degrees Celsius. Use op amp only at temperatures no higher than 125°C. A total of 4 elements are present in this linear amplifier. This electronic part is recommended to be used with an 600μA supply for best performance. With regard tp supply voltage, op amp is used under 20V. The dual supply voltage of 20V should be used for the conduct of this electronic component. Military, MIL-STD-883 is the number that corresponds to the series of the buffer op amp. As a result, linear amplifier's quiescent current is 725μA. On the linear amplifier, there are 4 amplifiers that are used.
5962-8777101MCA Features
141.58dB voltage gain
5962-8777101MCA Applications
There are a lot of Analog Devices Inc. 5962-8777101MCA Instrumentational OP Amps applications.
- Broadcasting
- Band-pass filter
- Proportional operation circuits
- E-book readers
- Video computer boards
- Navigation
- Video amplifiers
- MP3
- Subtraction operation circuits
- Strain gauges
