5962-88513012A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Package / Case | LCC |
| Surface Mount | YES |
| Number of Pins | 20 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | OP42 |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 20V |
| Power Dissipation | 500mW |
| Quiescent Current | 6.5mA |
| Supply Current-Max | 6mA |
| Slew Rate | 50 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 86 dB |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 87.96dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 20V |
| Low-Bias | YES |
| Min Dual Supply Voltage | 8V |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Screening Level | MIL-STD-883 |
| Dual Supply Voltage | 15V |
| Input Bias Current | 130pA |
| Height Seated (Max) | 2.54mm |
| Length | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-88513012A Overview
The linear amplifier is packaged in a LCC case which makes it easy for the consumer to handle. An op amp of this type is a OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 20. The pins on this board total to 20 in total. Please take in mind that op amp should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 20 pins are available on the instrumentation amplifier. Op amp rates 1.5mV as input offset voltage. It is a member of the 113.98dB's 113.98dB family. This instrumentation amplifier cannot operate below -55°C degrees Celsius. Use op amps only at temperatures no higher than 125°C. 1 elements make up the design of this buffer amplifier. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 20V. Conduct linear amplifier under the dual suuply voltage of 20V. Buffer amplifier has a quiescent current of 6.5mA.
5962-88513012A Features
20 Pins
supply voltage of 15V
113.98dB voltage gain
5962-88513012A Applications
There are a lot of Analog Devices Inc. 5962-88513012A Instrumentational OP Amps applications.
- Television broadcasting equipment
- Subtraction operation circuits
- Mobile phone
- Fast A/D and D/A converters
- Comparator
- Inverse/same-phase proportional circuit
- High/low-pass filter circuit
- Industrial applications including automation
- Signal amplification
- Tablets
