5962-8851301GA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | OP42 |
| Pin Count | 8 |
| Qualification Status | Qualified |
| Number of Elements | 1 |
| Power Dissipation | 500mW |
| Current - Supply | 5.1mA |
| Slew Rate | 52V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 80pA |
| Voltage - Supply, Single/Dual (±) | ±8V~20V |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 119.08dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 100.92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 300μV |
| Current - Output / Channel | 33mA |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
5962-8851301GA Overview
It is packaged in an TO-99-8 Metal Can-case that protects the operational amplifiers from damage. Buffer amps of this type are called J-FET-types. A Tube case is used for delivering the op amp. In recent months, the number of terminations has approached 8. Linear amplifier has a total of 8 pins. Please take in mind that op amp should be run at 15V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . Maintain 119.08dB as the voltage gain. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. A supply of 5.1mA or higher is recommended for use with this electronic part. Military, MIL-STD-883 corresponds to linear amplifier's series.
5962-8851301GA Features
8 Pins
supply voltage of 15V
119.08dB voltage gain
5962-8851301GA Applications
There are a lot of Analog Devices Inc. 5962-8851301GA Instrumentational OP Amps applications.
- Weak signal detection
- Power transmission
- Wireless base stations
- Television broadcasting equipment
- Industrial applications including automation
- Active probe
- Comparator
- MP3
- Oscilloscopes
- Subtraction operation circuits
