5962-8851301PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 500mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | OP42 |
| Pin Count | 8 |
| Qualification Status | Qualified |
| Number of Channels | 1 |
| Power Dissipation | 500mW |
| Quiescent Current | 6.5mA |
| Current - Supply | 5.1mA |
| Slew Rate | 52V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 86 dB |
| Current - Input Bias | 80pA |
| Voltage - Supply, Single/Dual (±) | ±8V~20V |
| Input Offset Voltage (Vos) | 1.5mV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 10000 kHz |
| Voltage Gain | 119.08dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 100.92dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 300μV |
| Current - Output / Channel | 33mA |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8851301PA Overview
The linear amplifier is packaged in a 8-CDIP (0.300, 7.62mm) case. Buffer amps of this type are called J-FET-types. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 15V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 8 pins. Regarding input offset voltage, buffer amplifier rates 1.5mV voltage. For this electrical component, the recommended mounting type is Through Hole, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -55°C~125°C . There should be no change in the voltage gain. Op amp ic has 1 channels. As a result, it is recommended that a power supply of 5.1mA be used with this electronic part. The Military, MIL-STD-883 represents the op amp's series number. There is an 6.5mA quiescent current running through op amp ic.
5962-8851301PA Features
8 Pins
supply voltage of 15V
119.08dB voltage gain
5962-8851301PA Applications
There are a lot of Analog Devices Inc. 5962-8851301PA Instrumentational OP Amps applications.
- Mobile phone
- Signal filtering
- High/low-pass filter circuit
- Video computer boards
- Cinema or auditorium audio system
- ECG equipment
- Band-pass filter
- Power control
- Automation control systems
- pH (acidity)
