5962-8856501CA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | OP470 |
| Pin Count | 14 |
| Qualification Status | Qualified |
| Number of Channels | 4 |
| Nominal Supply Current | 11mA |
| Power Dissipation | 800mW |
| Quiescent Current | 2.75mA |
| Current - Supply | 9mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 6nA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 400μV |
| Gain Bandwidth Product | 6MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 6000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Power Supply Rejection Ratio (PSRR) | 114.89dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 100μV |
| Bias Current-Max (IIB) @25C | 0.025μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Height Seated (Max) | 6.3mm |
| Length | 19.81mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8856501CA Overview
Packaging for the buffer amplifier is in the form of a 14-CDIP (0.300, 7.62mm) case. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. In recent months, the number of terminations has approached 14. Linear amplifier has a total of 14 pins. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. In total, the buffer amplifier consists of 14 pins. As far as the input offset voltage is concerned, linear amplifier rates at 400μV. This electrical part should be mounted using type Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~125°C . There should be no change in the voltage gain at 120dB. Buffer op amp is equipped with 4 channels on the device. To run supply current of buffer amplifier under 9mA. This buffer amplifier is assigned within the Military, MIL-STD-883 series by its manufacturer. 2.75mA quiescent currents are flowing through buffer op amp.
5962-8856501CA Features
14 Pins
supply voltage of 15V
120dB voltage gain
5962-8856501CA Applications
There are a lot of Analog Devices Inc. 5962-8856501CA Instrumentational OP Amps applications.
- Power generator
- Scintillation detectors
- Mobile phone
- Band-pass filter
- Broadcasting
- Voltage regulation circuit
- Instrumentation
- Laptop
- Test equipment
- Power transmission
