5962-8859301M2A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-CLCC |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | OP200 |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Number of Elements | 2 |
| Nominal Supply Current | 1.45mA |
| Current - Supply | 570μA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | ±3V~18V |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 75μV |
| Gain Bandwidth Product | 500kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 141.58dB |
| Average Bias Current-Max (IIB) | 0.005μA |
| Power Supply Rejection Ratio (PSRR) | 127.96dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 25μV |
| Micropower | YES |
| Dual Supply Voltage | 15V |
| Length | 8.89mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-8859301M2A Overview
Packaged in a 20-CLCC case, the buffer op amp is ready to use. An op amp of this type is a General Purpose-type. Linear amplifier is delivered in a Tube case. The number of terminations approaches 20. Buffer amplifier has a total of 20 pins on it. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. 20 pins are located on the operational amplifiers. There is an input offset voltage of 75μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -55°C~125°C when it comes to operating temperatureKeeping the voltage gain at 141.58dB is the best course of action. For the operating supply voltage of the op amp ic, there is a rating of 2. We recommend that you use this electronic part with an 570μA supply in order to get the best performance from it. As the name implies, Military, MIL-STD-883 refers to the series of the buffer op amp.
5962-8859301M2A Features
20 Pins
supply voltage of 15V
141.58dB voltage gain
5962-8859301M2A Applications
There are a lot of Analog Devices Inc. 5962-8859301M2A Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- High/low-pass filter circuit
- Ultrasound transducers
- ECG equipment
- Vehicle electronics
- Portable electronic products powered by batteries
- Addition operation circuits
- Automotive sensors
- Video amplifiers
- Thermocouples
