5962-8877002PA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~18V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 6A |
| Nominal Supply Current | 6A |
| Output Current | 6A |
| Max Supply Current | 6A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 100 ns |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 100 ns |
| Rise / Fall Time (Typ) | 25ns 25ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 6A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 6A 6A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 0.8V 2.4V |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
5962-8877002PA Overview
A higher degree of flexibility is achieved by adopting its 8-CDIP (0.300, 7.62mm) package.Tube is the packaging method.Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Through Hole.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 4.5V~18V supply voltage.Gate type N-Channel, P-Channel MOSFET is designed for it.There is a temperature range for this device of -55°C~125°C TA.The input type is Non-Inverting.The configuration is based on 8 terminations.You mount it with Through Hole.There are 8 pins available in the device.In this case, BUFFER OR INVERTER BASED MOSFET DRIVER serves as the interface IC.Mosfet driver is possible for the output current to be as low as 6A.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 8 component pins is available.This device is capable of delivering 6A current.According to its maximum power dissipation, 800mW is capable of conducting and transferring a large amount of power without overheating.In order to ensure greater stability, it is recommended to keep the supply current at 6A.
5962-8877002PA Features
Embedded in the Tube package
1 drivers
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 800mW
5962-8877002PA Applications
There are a lot of Maxim Integrated 5962-8877002PA gate drivers applications.
- General Purpose 3-Phase Inverter
- Uninterruptible Power Supplies (UPS)
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Controls
- Isolated switch mode power supplies (SMPS)
- Power factor correction (PFC) circuits
- High frequency line drivers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Motor Control
- Isolated Supplies for controller area network (CAN),
