5962-89710013X
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -55°C~125°C |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 600Ohm |
| Max Power Dissipation | 28mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG526 |
| Pin Count | 28 |
| Qualification Status | Qualified |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 470mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Screening Level | MIL-STD-883 |
| High Level Output Current | 20mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5 Ω |
| Height Seated (Max) | 2.54mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
5962-89710013X Overview
This electronic part is conveniently packaged in 28-LCC (J-Lead), making it easy to ship abroad. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. An extended operating temperature of -55°C~125°C degrees Celsius. Total terminations are 28. High-quality output is provided by the electronic component's 16 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. It is part of the design of the 28 series that this electronic component is included. Circuits based on SPST switching are used to construct these analog switch ics. The multiplexer consists of 1 circuits. Using the ADG526 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 600Ohm. To find out what the 28 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16.5V. The lowest voltage the electronic part should receive is 10.8V. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. If you are using a dual power supply, you should attach at least 10.8V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC.
5962-89710013X Features
16 Channels
Switch Circuit: SPST
5962-89710013X Applications
There are a lot of Analog Devices Inc. 5962-89710013X Analog Switches & Multiplexers ICs applications.
- ATM
- Multi-Line E1 Interface Cards
- Audio and video switching
- Channel Banks
- Channelized and Unchannelized DS3 applications
- Industrial and process control systems
- FTTH
- Cellular phones
- DSUs
- Cell phones
