5962-8971001XX
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-CDIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Supplier Device Package | 28-CDIP |
| Operating Temperature | -55°C~125°C |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 600Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 28mW |
| Base Part Number | ADG526 |
| Number of Outputs | 1 |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Operating Supply Current | 600μA |
| Power Dissipation | 470mW |
| Propagation Delay | 300 ns |
| Turn On Delay Time | 400 ns |
| Number of Inputs | 16 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±10.8V~16.5V |
| Turn-Off Delay Time | 400 ns |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 44pF |
| Switch Circuit | SPST |
| Switch Time (Ton, Toff) (Max) | 300ns, 300ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 22.5Ohm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
5962-8971001XX Overview
Presented in 28-CDIP (0.600, 15.24mm), this electrical component is convenient for overseas shipping. In Through Hole, this analog switch is mounted. There is 16:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to -55°C~125°C. A electrical component with 16 channels is capable of high-quality output. On the other hand, analog switches can be constructed using SPST switching circuits. A 1 circuit is present in this switch device. Search with ADG526 if you are looking for analog multiplexer variants. Analog switches have 600Ohm internal resistance. For functions related to 28 pins, please refer to the datasheets. normally, users should not supply switches with voltages higher than 16.5V. A low voltage of 10.8V should be applied to the electronic component. This digital switch can be operated with a current of 600μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 16.5V. It is recommended that you attach at least 10.8V to your dual power supply. Operating 16 inputs is required. An environment with a temperature greater than 125°C should not be used to operate the digital switches. 1 outputs are included in the analogue multiplexer. There is a 28-CDIP package offered by suppliers.
5962-8971001XX Features
16 Channels
Switch Circuit: SPST
600μA Supply Current
5962-8971001XX Applications
There are a lot of Analog Devices Inc. 5962-8971001XX Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Avionics
- CSU
- Cable PC
- Audio and video routing
- Avionics and Military Systems
- Sample-and-hold systems
- Relay replacements
- 65 V DACs
- Cable Modem
