5962-8996101EA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 45Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-GDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 25V |
| Operating Supply Current | 1μA |
| Turn On Delay Time | 275 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 30Ohm |
| Screening Level | MIL-STD-883 |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF 12pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 100ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 100ns |
| Normal Position | NO |
| RoHS Status | RoHS Compliant |
5962-8996101EA Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -55°C~125°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 2 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. 16 pins are injected to the electronic part body. Unlike digital switches, these are based on DPST - NO switching circuits. A total of 2 circuits make up this switch device. An switch multiplexer with 45Ohm internal resistance has a value of 45Ohm. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. It would be sufficient to run this analogue multiplexer with 1μA current. There is no problem with using dual supply voltage, but it should not exceed 22V.
5962-8996101EA Features
2 Channels
Switch Circuit: DPST - NO
1μA Supply Current
5962-8996101EA Applications
There are a lot of Maxim Integrated 5962-8996101EA Analog Switches & Multiplexers ICs applications.
- Public switching systems
- Transmit
- Isolation
- Audio and video routing
- MP3 players
- Microprocessor Controlled Analog Systems
- Battery Powered Instruments
- Communication systems
- Intelligent PBX
- Sample hold systems
