5962-9063301MCA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | AD713 |
| Pin Count | 14 |
| Qualification Status | Qualified |
| Number of Channels | 4 |
| Quiescent Current | 10mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 40pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 300μV |
| Gain Bandwidth Product | 4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4000 kHz |
| Voltage Gain | 112.04dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Current - Output / Channel | 25mA |
| Low-Bias | YES |
| Bias Current-Max (IIB) @25C | 0.0002μA |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.077μA |
| Input Voltage Noise Density | 45nV/sqrt Hz |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-9063301MCA Overview
A 14-CDIP (0.300, 7.62mm) case is used to package the op amp. The instrumentation amplifier in this picture is of the J-FET-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. Instrumentation amplifier is a part of Operational Amplifier. 14 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 300μV voltage. For this electrical component, Through Hole is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C TA for optimal performance. Op amp is a member of the 112.04dB's 112.04dB family. Instrumentation amplifier has 4 channels on it. As the name implies, Military, MIL-STD-883 refers to the series of the buffer op amp. Currently, linear amplifier is operating with a quiescent current of 10mA.
5962-9063301MCA Features
14 Pins
supply voltage of 15V
112.04dB voltage gain
5962-9063301MCA Applications
There are a lot of Analog Devices Inc. 5962-9063301MCA Instrumentational OP Amps applications.
- Broadcasting
- Multiplication circuits
- Measurements of Wheatstone bridge
- Commercial audio systems
- Band-pass filter
- Band-stop filter
- Addition operation circuits
- Multimedia playback equipment
- Signal amplification
- Signal filtering
