5962-9071201MPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 35ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| RoHS Status | RoHS Compliant |
5962-9071201MPA Overview
A total of 8 terminals are used to mount this power management. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 8-CDIP (0.300, 7.62mm) functions for your convenience. There are a number of benefits that this PMIC has in common with other Battery Backup Circuit manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 245. During operation, the power ic is supplied with a voltage of 5V. IC management conducts in a 1-voltage supply. Through Hole is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. 8 pins make up the power management. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 4.75V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Through Hole. It is recommended to set the supervisor's temperature to this range: -55°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 10mA for the power management. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. A maximum supply temperature of 10mA can be used with this power management.
5962-9071201MPA Features
Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current
5962-9071201MPA Applications
There are a lot of Maxim Integrated 5962-9071201MPA Voltage Supervisors applications.
- Data storage applications
- Electric heating appliances
- Medical-specific isolation transformer
- Analog circuit
- Multi-voltage system
- Detection of phase imbalance
- Linux and server computing
- Precision measurement
- Detection of phase loss
- Medical-specific insulation monitor
