Parameters |
Mount |
Surface Mount |
Number of Pins |
24 |
Number of Terminations |
24 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
FLAT |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Pin Count |
24 |
Qualification Status |
Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
MILITARY |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Number of Bits |
8 |
Family |
BCT/FBT |
Logic Function |
Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Prop. Delay@Nom-Sup |
9.9 ns |
High Level Output Current |
-12mA |
Propagation Delay (tpd) |
13.9 ns |
Low Level Output Current |
48mA |
Control Type |
INDEPENDENT CONTROL |
Translation |
N/A |
Height Seated (Max) |
2.29mm |
Length |
14.355mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Contact Plating |
Lead, Tin |
5962-9087001MKA Overview
24 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the BCT/FBT family of parts. 24 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 24 pins. Enhanced with 2 ports. The digital buffer starts up under INDEPENDENT CONTROL control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH to better serve the need. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 48mA to its low level. In high level output mode, the electronic parts may conduct -12mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
5962-9087001MKA Features
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
High Level Output: 48mA
Low Level Output: -12mA
5962-9087001MKA Applications
There are a lot of Texas Instruments 5962-9087001MKA Buffers & Transceivers applications.
- Wireless security systems
- Switching system
- SONET/SDH Network
- Cordless telephone
- Satellite communication
- IP cameras
- Portable radio
- Telecom and datacom networking applications
- Single fiber bidirectional application
- Wireless network systems