Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
20-CLCC |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
Series |
Military, MIL-STD-883 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
THROUGH-HOLE |
Number of Functions |
2 |
Supply Voltage |
15V |
Base Part Number |
OP249 |
Pin Count |
8 |
Qualification Status |
Qualified |
Operating Supply Voltage |
15V |
Number of Channels |
2 |
Nominal Supply Current |
7mA |
Quiescent Current |
3.5mA |
Current - Supply |
5.6mA |
Slew Rate |
22V/μs |
Architecture |
VOLTAGE-FEEDBACK |
Amplifier Type |
J-FET |
Common Mode Rejection Ratio |
80 dB |
Current - Input Bias |
30pA |
Voltage - Supply, Single/Dual (±) |
±4.5V~18V |
Input Offset Voltage (Vos) |
400μV |
Gain Bandwidth Product |
4.7MHz |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Unity Gain BW-Nom |
4700 kHz |
Voltage Gain |
122.92dB |
Average Bias Current-Max (IIB) |
0.000075μA |
Power Supply Rejection Ratio (PSRR) |
98.42dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Voltage - Input Offset |
200μV |
Current - Output / Channel |
36mA |
Low-Bias |
YES |
Micropower |
NO |
Bias Current-Max (IIB) @25C |
0.000075μA |
Programmable Power |
NO |
Dual Supply Voltage |
15V |
Wideband |
NO |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
5962-9151901MPA Overview
There is a 20-CLCC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called J-FET-types. The case in which buffer amplifier is delivered is called a Tube case. The number of terminations approaches 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 400μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C TA. It is recommended to keep the voltage gain at 122.92dB at all times. There are 2 channels on the operational amplifiers. The operating supply voltage of instrumentation amplifier is rated 15V voltage. As a recommendation, this electronic component should be used with a power supply that can deliver 5.6mA. Buffer op amp series numbers are indicated by the Military, MIL-STD-883. 3.5mA quiescent currents are flowing through buffer op amp.
5962-9151901MPA Features
8 Pins
supply voltage of 15V
122.92dB voltage gain
5962-9151901MPA Applications
There are a lot of Analog Devices Inc. 5962-9151901MPA Instrumentational OP Amps applications.
- Micro signal measurement
- Mobile phone
- Fission chambers
- Non-polarized electrodes
- Strain gauges
- Home audio systems
- Video computer boards
- ECG equipment
- Medical instruments
- Signal amplification