5962-9204102MEA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 10V |
| Operating Supply Current | 100μA |
| Turn On Delay Time | 400 ns |
| Voltage - Supply, Single/Dual (±) | 10V~30V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 4pF 4pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 170ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -100dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 210ns |
| Normal Position | NO |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
5962-9204102MEA Overview
Shipping overseas is convenient due to the electrical component's packing in 16-CDIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. Through Hole is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -55°C~125°C TA. The total number of terminations is 16. A 1 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SPST - NO switching circuit is used for these analog switches. It consists of 4 circuits. A 160Ohm internal resistance characterizes this multiplexer. For functions related to 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 30V volts for the multiplexer. 10V is the lowest voltage the electrical component should receive. For this digital switch to work, 100μA current would suffice. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. You should attach at least 4.5V voltage if you are using dual power supply. 28V operating voltages are supported by the electronic component.
5962-9204102MEA Features
1 Channels
Switch Circuit: SPST - NO
100μA Supply Current
5962-9204102MEA Applications
There are a lot of Maxim Integrated 5962-9204102MEA Analog Switches & Multiplexers ICs applications.
- Digital access cross connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery Powered Instruments
- ISDN NT1/TA
- DSLAMs
- Audio signal routing
- Medical systems
- DSUs
- USB 1.1 signal switching circuits
- Private Branch Exchange (PBX)
