5962-9204202MEA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) - hot dipped |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-CDIP-T16 |
| Power Supplies | +-15V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 4.5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 4.5V |
| Screening Level | MIL-STD-883 Class B |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 3pF 14pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
5962-9204202MEA Overview
The electrical component comes in 16-CDIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a number of circuits 4:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there are 16 terminations. A high-quality output is provided by the electrical component's 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of its design, the 16 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SP4T switching circuits. The multiplexer consists of 2 circuits. Multiplexer or Switches is a typical switch device. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. 4.5V should be the lowest voltage fed to the electronic component. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. An analog IC with the number DIFFERENTIAL MULTIPLEXER is integrated into this board.
5962-9204202MEA Features
8 Channels
Switch Circuit: SP4T
5962-9204202MEA Applications
There are a lot of Maxim Integrated 5962-9204202MEA Analog Switches & Multiplexers ICs applications.
- MP3 players
- CSU
- ISDN NT1/TA
- Industrial and process control systems
- New designs requiring multiplexer functions
- HDTV
- Optical Applications
- High-Voltage
- High speed data transmission line cards
- Microprocessor controlled systems
