5962-9211701MPA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Lead, Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-CDIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | Military, MIL-STD-883 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Subcategory | Operational Amplifier |
| Max Power Dissipation | 1.3W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD827 |
| Pin Count | 8 |
| Qualification Status | Qualified |
| Power Supplies | +-5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 13.5mA |
| Power Dissipation | 1.3W |
| Quiescent Current | 6.75mA |
| Slew Rate | 300V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 3.3μA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 50MHz |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 9.5μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Current - Output / Channel | 32mA |
| Bias Current-Max (IIB) @25C | 7μA |
| Input Voltage Noise Density | 15nV/sqrt Hz |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
5962-9211701MPA Overview
In order to protect the op amps, a 8-CDIP (0.300, 7.62mm) case is used. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are included on the operational amplifiers. There is an input offset voltage of 500μV for this buffer op amp. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. Operational amplifier can operate supply current at 13.5mA. It is a member of the 70.88dB's 70.88dB family. On the buffer amps, there are 2 channels that can be used. The Military, MIL-STD-883 indicates the series number of the op amp. There is an 6.75mA quiescent current running through op amp ic.
5962-9211701MPA Features
8 Pins
70.88dB voltage gain
5962-9211701MPA Applications
There are a lot of Analog Devices Inc. 5962-9211701MPA Instrumentational OP Amps applications.
- earphone
- Cinema or auditorium audio system
- Professional videography
- E-book readers
- Communication device
- Image computer boards
- Navigation
- Exponential operation circuits
- Signal filtering
- PDA
