5962-9221403MRA
| Parameters | |
|---|---|
| Nominal Supply Current | 5mA |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Prop. Delay@Nom-Sup | 4.9 ns |
| High Level Output Current | -15mA |
| Low Level Output Current | 64mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Length | 25.4mm |
| Width | 7.62mm |
| Thickness | 2.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 8 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
5962-9221403MRA Overview
Logical driver uses a neat CDIP package. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the FCT family of parts. 20 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 20 pins. Enhanced with 2 ports. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 5V power supply. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -15mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5V.
5962-9221403MRA Features
WITH DIRECTION CONTROL
High Level Output: 64mA
Low Level Output: -15mA
5962-9221403MRA Applications
There are a lot of Integrated Device Technology (IDT) 5962-9221403MRA Buffers & Transceivers applications.
- Data center
- interconnection between computers
- Wireless access points
- Desktop PC
- Cell phones
- Satellite radio receiver
- Carrier phase observations
- Cable network front end
- Solenoids
- Wired telephone
