5962-9225803MXA
| Parameters | |
|---|---|
| Thickness | 2.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 48 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | WITH DIRECTION CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Qualification Status | Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 16 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 500μA |
| Family | FCT |
| Logic Function | Transceiver |
| Output Characteristics | 3-STATE |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Screening Level | MIL-STD-883 |
| High Level Output Current | -24mA |
| Low Level Output Current | 48mA |
| Control Type | COMMON CONTROL |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Length | 16.3mm |
| Width | 9.65mm |
5962-9225803MXA Overview
All of the 2 elements are put into use. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a FCT family part that is attached to this electronic component. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 500μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DIRECTION CONTROL to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -55°C. Digital buffer should operate with ambient temperature no higher than 125°C. Buffer driver outputs 48mA to its low level. In high level output mode, the electronic parts may conduct -24mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V.
5962-9225803MXA Features
WITH DIRECTION CONTROL
High Level Output: 48mA
Low Level Output: -24mA
5962-9225803MXA Applications
There are a lot of Integrated Device Technology (IDT) 5962-9225803MXA Buffers & Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- SONET/SDH Network
- Carrier phase observations
- Long-distance fiber optic network applications
- Cell phones
- Wired telephone
- Sensor reporting
- Switching system
- Data center
- Home theater wiring-free
