5962-9564003Q2A
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Lead, Tin |
| Surface Mount | YES |
| Number of Pins | 20 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Operational Amplifier |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Qualification Status | Qualified |
| Power Supplies | 5/+-5V |
| Temperature Grade | MILITARY |
| Number of Channels | 2 |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.4V |
| Power Dissipation-Max | 1.375W |
| Slew Rate | 0.12 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 60pA |
| Gain Bandwidth Product | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 124.61dB |
| Average Bias Current-Max (IIB) | 0.001μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Max Dual Supply Voltage | 8V |
| Low-Bias | YES |
| Micropower | YES |
| Min Dual Supply Voltage | 2.2V |
| Bias Current-Max (IIB) @25C | 0.0005μA |
| Programmable Power | NO |
| Screening Level | MIL-PRF-38535 Class Q |
| Nominal Gain Bandwidth Product | 200 kHz |
| Max I/O Voltage | 850μV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.001μA |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
5962-9564003Q2A Overview
There are two types of operational amplifiers in this circuit. During the past two weeks, there have been close to 20 terminations. The pins on this board total to 20 in total. Please take in mind that op amp should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. It has 20 pins that make up the linear amplifier. 124.61dB should remain the voltage gain. The op amp ic has 2 channels on it. This instrumentation amplifier cannot operate below -55°C degrees Celsius. No temperature greater than 125°C should be used. The linear amplifier is packaged by using a TUBE axis. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 16V. A high supply voltage of more than 4.4V is recommended for the instrumentation amplifier's supply voltage. In order for this electronic part to be conducted successfully, you should use a dual supply voltage of 8V.
5962-9564003Q2A Features
20 Pins
supply voltage of 5V
124.61dB voltage gain
5962-9564003Q2A Applications
There are a lot of Texas Instruments 5962-9564003Q2A Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Measurements of Wheatstone bridge
- Cinema or auditorium audio system
- Logarithmic operation circuits
- Automatic control
- Oscilloscopes
- Broadcasting
- Instrumentation
- Weak signal detection
- Video amplifiers
