5M1270ZT144C4N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | MATTE TIN (472) OVER COPPER |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.3148GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.8V |
| Power Supplies | 1.81.2/3.3V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 2mA |
| Number of I/O | 114 |
| Nominal Supply Current | 2mA |
| Memory Type | FLASH |
| Propagation Delay | 8.1 ns |
| Frequency (Max) | 304MHz |
| Number of Programmable I/O | 114 |
| Number of Logic Blocks (LABs) | 1270 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 22mm |
| Width | 22mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
5M1270ZT144C4N Overview
Currently, there are 980 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.TQFPis the package in which it resides.In this case, there are 114 I/Os programmed.There is a 144terminations set on devices.The terminal position of this electrical component is QUAD.An electrical supply voltage of 1.8V is used to power it.It is included in Programmable Logic Devices.The chip is programmed with 144 pins.This device is also capable of displaying [0].If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.This device is mounted by Surface Mount.It is designed with 144 pins.This device operates at a voltage of 1.89Vas its maximum supply voltage.It is powered by 1.71Vas its minimum supply voltage.It runs on 1.81.2/3.3Vvolts of power.Programmable I/Os are counted up 114.In this case, 2.3148GHzis the frequency that can be achieved.It is recommended that the operating temperature exceeds 0°C.Ideally, the operating temperature should be below 85°C.Its basic building block is composed of 1270 logic blocks (LABs).There should be a lower maximum frequency than 304MHz.Devices contain a 1kBmemory for storing data and programs.
5M1270ZT144C4N Features
TQFP package
114 I/Os
144 pin count
144 pins
1.81.2/3.3V power supplies
1270 logic blocks (LABs)
5M1270ZT144C4N Applications
There are a lot of Altera 5M1270ZT144C4N CPLDs applications.
- Programmable polarity
- Field programmable gate
- Battery operated portable devices
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- Boolean function generators
- Digital systems
- ROM patching
- Code converters
- Custom shift registers
