5M1270ZT144I5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 144 |
| Weight | 1.319103g |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 144 |
| ECCN Code | 3A991 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 100°C |
| Min Operating Temperature | -40°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Pin Count | 144 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 2mA |
| Number of I/O | 114 |
| Memory Type | FLASH |
| Propagation Delay | 6.2 ns |
| Frequency (Max) | 304MHz |
| Number of Logic Elements/Cells | 1270 |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 980 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
5M1270ZT144I5N Overview
There are 980 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.You can find it in package [0].It is equipped with 114I/O ports.144terminations are programmed into the device.Its terminal position is QUAD.A voltage of 1.8V is used as the power supply for this device.This part is part of the family [0].There are 144pins on the chip.When using this device, YEScan also be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].Data is stored using [0].In this case, it is mounted by Surface Mount.This board has 144 pins.There is a maximum supply voltage of 1.89Vwhen the device is operating.The device is designed to operate with a minimal supply voltage of 1.71VV.It is recommended that the operating temperature exceed -40°C.It is recommended to keep the operating temperature below 100°C.The system consists of 8 logic blocks (LABs).In order to form a fundamental building block, there are 1270 logic elements or cells.The maximal frequency should be lower than 304MHz.Devices contain a 1kBmemory for storing data and programs.
5M1270ZT144I5N Features
TQFP package
114 I/Os
144 pin count
144 pins
8 logic blocks (LABs)
5M1270ZT144I5N Applications
There are a lot of Altera 5M1270ZT144I5N CPLDs applications.
- Field programmable gate
- Discrete logic functions
- Digital multiplexers
- Address decoders
- D/T registers and latches
- Multiple Clock Source Selection
- INTERRUPT SYSTEM
- Wide Vin Industrial low power SMPS
- Bootloaders for FPGAs
- Timing control
