5M160ZT100C4N
| Parameters | |
|---|---|
| Width | 16mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 25μA |
| Number of I/O | 79 |
| Nominal Supply Current | 25μA |
| Memory Type | FLASH |
| Propagation Delay | 7.9 ns |
| Frequency (Max) | 152MHz |
| Number of Programmable I/O | 79 |
| Number of Logic Blocks (LABs) | 160 |
| Speed Grade | 4 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 1.2mm |
| Length | 16mm |
5M160ZT100C4N Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a TQFP package.This device has 79 I/O ports programmed into it.It is programmed that device terminations will be 100 .The terminal position of this electrical component is QUAD.There is 1.8V voltage supply for this device.It belongs to the family [0].The chip is programmed with 100 pins.When using this device, YEScan also be found.If high efficiency is to be achieved, the supply voltage should be maintained at [0].In this case, FLASHwill be used to store the data.The electronic component is mounted by Surface Mount.It is designed with 100 pins.This device operates at a voltage of 1.89V when the maximum supply voltage is applied.Initially, it requires a voltage of 1.71Vas the minimum supply voltage.Currently, there are 79 Programmable I/Os available.It is recommended that the operating temperature be higher than 0°C.It is recommended that the operating temperature be below 85°C.The system consists of 160 logic blocks (LABs).The maximum frequency should not exceed 152MHz.Devices contain a 1kBmemory for storing data and programs.
5M160ZT100C4N Features
TQFP package
79 I/Os
100 pin count
100 pins
160 logic blocks (LABs)
5M160ZT100C4N Applications
There are a lot of Altera 5M160ZT100C4N CPLDs applications.
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Storage Cards and Storage Racks
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- TIMERS/COUNTERS
- D/T registers and latches
- INTERRUPT SYSTEM
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Wide Vin Industrial low power SMPS
- Bootloaders for FPGAs
- Discrete logic functions
