5M570ZT100C5N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| Weight | 657.000198mg |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.8V |
| Frequency | 1.4749GHz |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 1.89V |
| Min Supply Voltage | 1.71V |
| Memory Size | 1kB |
| Operating Supply Current | 27μA |
| Number of I/O | 74 |
| Memory Type | FLASH |
| Propagation Delay | 9 ns |
| Frequency (Max) | 152MHz |
| Number of Logic Elements/Cells | 570 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 5 |
| Output Function | MACROCELL |
| Number of Macro Cells | 440 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
5M570ZT100C5N Overview
In the mobile phone network, there are 440macro cells, which are cells with high-power antennas and towers.You can find it in package [0].In this case, there are 74 I/Os programmed.There is a 100terminations set on devices.This electrical component has a terminal position of 0.The device is powered by a voltage of 1.8V volts.It is a part of the family [0].There are 100pins on the chip.The device can also be used to find [0].High efficiency requires the supply voltage to be maintained at [0].It is recommended that data be stored in [0].This device is mounted by Surface Mount.There are 100 pins embedded in the device.A maximum voltage of 1.89Vis required for operation.A minimum supply voltage of 1.71V is required for it to operate.A frequency of 1.4749GHzcan be achieved.In order to operate properly, the operating temperature should be higher than 0°C.A temperature less than 85°Cshould be used for operation.The system consists of 8 logic blocks (LABs).In order to form a fundamental building block, there are 570 logic elements or cells.A maximum frequency of less than 152MHzis recommended.Using the devices' 1kBmemory, programs and data can be stored.
5M570ZT100C5N Features
TQFP package
74 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
5M570ZT100C5N Applications
There are a lot of Altera 5M570ZT100C5N CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Cross-Matrix Switch
- D/T registers and latches
- Battery operated portable devices
- I/O expansion
- DMA control
- Field programmable gate
- Synchronous or asynchronous mode
- I2C BUS INTERFACE
- Configurable Addressing of I/O Boards
