687ULR010MGU
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 10V |
| Capacitance | 680μF |
| Lead Pitch | 5.0038mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 240mOhm |
| Polarity | Polar |
| Ripple Current | 6.1A |
| Life (Hours) | 2000 hours |
| Height Seated (Max) | 13.9954mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 680μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 687ULR010MGU capacitor Illinois Capacitor 687ULR010MGU is suitable to conduct the ripple current at 6.1A. 687ULR010MGU Capacitor is mounted by Through Hole. There are 2 terminals embeded in 687ULR010MGU Capacitor. Voltage - Rated often has values of 10V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 680μF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 687ULR010MGU Aluminum Polymer Capacitors.
Typically, 687ULR010MGU is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Bypassing Noise Filtering
- Power Line Buffering
- To reduce power noise & signal noise
- To enhance power efficiency
- PFC
- Computer motherboards
- Flashtube Ignition
- Signal decoupling & power bypass
- UPS Buffering
- Audio Crossover
