6EDL04I06NTXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | EiceDriver™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.3W |
| Technology | CMOS |
| Voltage - Supply | 13V~17.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Max Output Current | 240mA |
| Power Supplies | 15V |
| Power Dissipation | 1.3W |
| Output Current | 375mA |
| Max Supply Current | 1.8mA |
| Propagation Delay | 800 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 800 ns |
| Halogen Free | Halogen Free |
| Rise Time | 100ns |
| Fall Time (Typ) | 45 ns |
| Turn-Off Delay Time | 760 ns |
| Rise / Fall Time (Typ) | 60ns 26ns |
| Channel Type | 3-Phase |
| Number of Drivers | 6 |
| Turn On Time | 0.8 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
6EDL04I06NTXUMA1 Overview
Gate drivers provides greater flexibilGate driversy to use the 28-SOIC (0.295, 7.50mm Width) package.Tape & Reel (TR) is the form of the package.The configuration is supported by 6 drivers.Surface Mount is the way in which it is mounted.In the absence of a power supply voltage of 13V~17.5V V, it is able to demonstrate its superiority.A gate type of IGBT, N-Channel, P-Channel MOSFET is used in its design.Temperature range -40°C~125°C TJ is allowed for this device.Input type of Non-Inverting is used.There are 28 terminations to form the base of its configuration.The device is mounted using Surface Mount.As a result, it is configured with 28 pins when it is designed.This device operates with 15V supply voltage.The maximum output current can amount to 240mA.Mosfet driver includes a number of useful electronic components in Mosfet drivers subcategory of Peripheral Drivers.The number of component pins is 28.There can be a voltage up to 600V on the high-side (Bootstrap).The device is capable of delivering a current of 375mA.Based on its maximum power dissipation of 1.3W, it is clear that it is capable of transferring and conducting power loss without overheating.To maintain higher stability, the supply current should always be 1.8mA.With its power supplies of 15V, it solves the problems of power supply for a variety of applications.Gate drivers in this series are included in the EiceDriver? series.
6EDL04I06NTXUMA1 Features
Embedded in the Tape & Reel (TR) package
6 drivers
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 1.3W
Operating with the supply voltage of EiceDriver?
6EDL04I06NTXUMA1 Applications
There are a lot of Infineon Technologies 6EDL04I06NTXUMA1 gate drivers applications.
- DC-DC Converters
- Dual-Battery Systems
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Modules
- Telecom switch mode power supplies
- Motor Controls
- A/D drivers
- serial peripheral interface (SPI), I2C
- Commercial air-conditioning (CAC)
- RGB applications
