6EDL04N02PRXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | EiceDriver™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Voltage - Supply | 10V~17.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 28 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Max Output Current | 240mA |
| Power Supplies | 15V |
| Power Dissipation | 600mW |
| Output Current | 375mA |
| Max Supply Current | 1.5mA |
| Propagation Delay | 800 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 800 ns |
| Halogen Free | Halogen Free |
| Rise Time | 100ns |
| Fall Time (Typ) | 45 ns |
| Rise / Fall Time (Typ) | 60ns 26ns |
| Channel Type | 3-Phase |
| Turn On Time | 0.8 μs |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel, P-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.7V |
| Turn Off Time | 0.8 μs |
| High Side Voltage - Max (Bootstrap) | 200V |
| Height Seated (Max) | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
6EDL04N02PRXUMA1 Overview
Its 28-TSSOP (0.173, 4.40mm Width) package is adopted for higher flexibility.A package of Tape & Reel (TR) has been used.Ideally, it should be mounted in the direction of Surface Mount.WGate driversh a 10V~17.5V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.IGBT, N-Channel, P-Channel MOSFET is the gate type used for this design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type is Non-Inverting.The configuration is based on 28 terminations.You mount it with Surface Mount.There are 28 pins available in the device.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be limited to 240mA.Several electronic components are included in its subcategory of Peripheral Drivers.The board has 28 component pins.A boot strap voltage of 200V is the maximum possible high-side voltage.The basis of this model has 6 outputs integrated.This device is capable of delivering 375mA current.This device has a maximum power dissipation of 600mW, indicating that it is capable of reducing power loss without overheating.Mosfet gate drivers is recommended that you keep the supply current at 1.5mA in order to achieve greater stabilMosfet gate driversy.The power supply of 15V is able to solve the power supply problems for a wide variety of applications.This gate driver belongs to the EiceDriver? series.
6EDL04N02PRXUMA1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel, P-Channel MOSFET
28 pins
High-side voltage - Max (Bootstrap) of 200V
Maximum power dissipation of 600mW
Operating with the supply voltage of EiceDriver?
6EDL04N02PRXUMA1 Applications
There are a lot of Infineon Technologies 6EDL04N02PRXUMA1 gate drivers applications.
- LCD/LCoS/DLP portable and embedded pico projectors
- PCMCIA applications
- Isolated Gate Driver Supplies
- Smart Phones
- Portable Media Players
- Commercial and agricultural vehicles (CAV)
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Isolated switch mode power supplies (SMPS)
- High power buffers
