6PAIC23BIPWRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Stereo Audio |
| Subcategory | Other Consumer ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | AIC23B |
| Pin Count | 28 |
| Interface | 2-Wire, I2C, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.42V |
| Data Interface | Serial |
| Sampling Rate | 96 ksps |
| Voltage - Supply, Analog | 2.7V~3.6V |
| Voltage - Supply, Digital | 2.7V~3.6V |
| Power Consumption | 23mW |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 90 dB |
| Number of ADC Channels | 1 |
| Resolution (Bits) | 24 b |
| Number of Analog Inputs | 3 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Dynamic Range, ADCs / DACs (db) Typ | 90 / 90 |
| S/N Ratio, ADCs / DACs (db) Typ | 90 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
6PAIC23BIPWRG4Q1 Overview
For space-saving purposes, it is packaged in 28-TSSOP (0.173, 4.40mm Width). We have adopted the packaging method of Tape & Reel (TR). This electronic part is categorized as a type of Stereo Audio, making it capable of providing high-efficiency performance in a variety of applications. Surface Mount is the mounting type employed by this device. It is able to operate normally when the operating performance is set at -40°C~85°C. Integrated ADCs / DACs are available in 2 / 2. A supply voltage of 2.7V~3.6V is applied to the analog circuit. Digital circuits are powered by 2.7V~3.6V supply voltages. Transmission lines have 28 terminations, which prevent signals from re-emitted. In terms of electronics, it is a 28-pin device. The board is configured with 28 pins. Find more related parts by using its base part number AIC23B. 3.6V should be the maximum value of the supply voltage. Analog signals are converted into digital signals by A/D converters. Subcategory Other Consumer ICs describes this electronic part. Supply voltage should be maintained at 1.42V. A wide range of applications can be met by this electronic component belonging to the Automotive, AEC-Q100 series. It is equipped with 3 analog inputs. A total of 4 analog outputs are available on the device. As far as the analog values can be read at once, this ADC has 1 channels.
6PAIC23BIPWRG4Q1 Features
Embedded in the 28-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
2 A/D converters
3 analog inputs
4 analog outputs
6PAIC23BIPWRG4Q1 Applications
There are a lot of Texas Instruments 6PAIC23BIPWRG4Q1 CODECs Interface ICs applications.
- War field flying robot with a using night-vision flying camera
- Spooling or level wind
- Dimensionality reduction
- Aerospace
- Stagecraft
- Microprocessor
- Robotic arm positioning
- Digital systems
- Logical circuits
- Oil & gas production
