6PAIC3254IRHBRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Audio |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AIC3254 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, SPI, Serial |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.9V |
| Operating Mode | SYNCHRONOUS |
| Data Interface | I2C, SPI |
| Sampling Rate | 192 ksps |
| Voltage - Supply, Analog | 1.5V~3.6V |
| Voltage - Supply, Digital | 1.26V~3.6V |
| Power Consumption | 4.1mW |
| Signal to Noise Ratio (SNR) | 93 dB |
| Resolution (Bits) | 32 b |
| Number of DAC Channels | 2 |
| Number of Analog Inputs | 6 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 2 / 2 |
| Filter | YES |
| Dynamic Range, ADCs / DACs (db) Typ | 92 / 100 |
| S/N Ratio, ADCs / DACs (db) Typ | 93 / 100 |
| Number of Analog Outputs | 4 |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
6PAIC3254IRHBRQ1 Overview
A 32-VFQFN Exposed Pad package is supplied for space savings. It is adopted to package in the manner of Tape & Reel (TR). Because it is a type of Audio, it delivers high-efficiency performance in many applications. It employs Surface Mount as its mounting type. A performance setting of -40°C~85°C allows it to operate normally. It consists of 2 / 2 ADCs/ DACs. The analog circuit is powered by 1.5V~3.6V. 1.26V~3.6V is the supply voltage for the digital circuit. The transmission line is terminated with 32 terminations to prevent reflection of signals. In electronic terms, it is a kind of 32-pin device. Its base part number AIC3254 can be used to find more parts like it. Based on the Surface Mount technology, the module is mounted to a PCB. Supply voltage should never exceed 3.6V. It is recommended that the minimum supply voltage be kept at 1.9V. A voltage of 1.8V is required to operate the device. It can be operated from a voltage of 3.3V. As a member of the Automotive, AEC-Q100 series, this electronic component is suitable for a wide spectrum of applications. There are 6 analog inputs on the device. A total of 4 analog outputs are available on the device. An analog output can be sampled from a numerical value by 2 DAC channels.
6PAIC3254IRHBRQ1 Features
Embedded in the 32-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C
2 / 2 ADCs / DACs
6 analog inputs
4 analog outputs
6PAIC3254IRHBRQ1 Applications
There are a lot of Texas Instruments 6PAIC3254IRHBRQ1 CODECs Interface ICs applications.
- Registration mark timing
- Full adders
- War field flying robot with a using night-vision flying camera
- Aerospace
- Timber products
- Radiation therapy
- Ships navigation
- Cut-to-length
- Galvanometer scanners
- Servo motors
