6SEQP330M+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Surface Mount | NO |
| Terminal Shape | WIRE |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | OS-CON™, SEQP |
| Size / Dimension | 0.394Dia 10.00mm |
| Tolerance | ±20% |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 330μF |
| Voltage - Rated DC | 6.3V |
| Terminal Pitch | 5mm |
| ESR (Equivalent Series Resistance) | 25mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.197 5.00mm |
| Lifetime @ Temp | 1000 Hrs @ 125°C |
| Leakage Current | 0.416mA |
| Tan Delta | 0.12 |
| Ripple Current @ Low Frequency | 58.5mA @ 120Hz |
| Ripple Current @ High Frequency | 1.17A @ 100kHz |
| Diameter | 10mm |
| Height Seated (Max) | 0.315 8.00mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
The capacitance can run at the range of 330μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Reel (TR) packaging. It belongs to OS-CON™, SEQP series. This part is mounted in the way of Through Hole. The type of the 6SEQP330M+T capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~125°C. Panasonic Electronic Components 6SEQP330M+T 6SEQP330M+T Capacitor The typical values of Voltage - Rated DC are 6.3V. There are 2 terminals embeded in 6SEQP330M+T Capacitor. There are 0.416mA to protect the current flowing from the ground conductor to ground.
OS-CON™, SEQP Series
Capacitance: 330μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Reel (TR)
Works Operating Temperature: -55°C~125°C
There are great quantities of applications of 6SEQP330M+T Aluminum Polymer Capacitors.
Typically, 6SEQP330M+T is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- Server motherboards
- Lighting Ballast
- Spot Welding
- Audio Crossover
- To enhance power efficiency
- Computer motherboards
- Voltage Doubling
- DC/DC, DC/AC, and AC/AC converters
- To reduce power noise & signal noise
