71M6511H-IGTR/F
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | Single Converter Technology® |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 71M6511 |
| Pin Count | 64 |
| JESD-30 Code | S-PQFP-G64 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Memory Size | 64kB |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Number of I/O | 12 |
| RAM Size | 7kB |
| Memory Type | FLASH |
| Adjustable Threshold | NO |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 9.5mA |
| Max Frequency | 5MHz |
| Number of UART Channels | 2 |
| Input Impedance | 40kOhm~90kOhm |
| Meter Type | Single Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
71M6511H-IGTR/F Overview
I have packed this in Tape & Reel (TR). It is packaged in the 64-LQFP format. An example of its use as a Single Phase meter would be the following. Currently available in Surface Mount. Extended operating temperature at -40°C~85°C. The unit is powered by a 3V~3.6V power supply. Check out 71M6511 for more similar parts. In its low-level I/O ports, this PMIC has a voltage of 0.8V. It is important to note that this device presents a voltage of 2V for high-level I/Os. Parts of the part are terminated with 64 wires. The PMIC analog POWER SUPPLY MANAGEMENT CIRCUIT IC is a powerful device. The normal voltage required for the part is 3.3V. The device requires a voltage of 3V or higher to operate. You should keep the voltage that goes to the device under 3.6V. There are 64 pins that are joined together. In this case, it is a Other Analog ICs, which represents a specialized need. Power supplies are generally required to power the device. A memory chip must have a voltage no greater than 9.5mA to work properly. This feature is included in the Single Converter Technology? series. It can operate up to 5MHz Hz. As part of this PMIC, the memory size 64kB is included. In the PMIC, FLASH memory is utilized.
71M6511H-IGTR/F Features
Single Phase meter.
POWER SUPPLY MANAGEMENT CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6511H-IGTR/F Applications
There are a lot of Maxim Integrated 71M6511H-IGTR/F Energy Metering ICs applications.
- Real-Time Measurement of Input Power for AC/DC Supplies
- Telecommunications and data communications equipment
- PCs/servers
- Poly-phase energy meters of class 0.5S and class 1
- Intelligent Power Distribution Units
- Server Backplane Systems
- Telecom Infrastructure
- Subsystem Power Measurement
- Power monitoring/power budgeting
- Base Station Power Distribution Systems
