banner_page

71M6541FT-IGT/F

71M6541FT-IGT/F datasheet pdf and PMIC - Energy Metering product details from Maxim Integrated stock available at Noco


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-71M6541FT-IGT/F
  • Package: 64-LQFP
  • Datasheet: PDF
  • Stock: 870
  • Description: 71M6541FT-IGT/F datasheet pdf and PMIC - Energy Metering product details from Maxim Integrated stock available at Noco(Kg)

Details

Tags

Parameters
Terminal Pitch 0.5mm
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Interface I2C, UART
Memory Size 64kB
Analog IC - Other Type ANALOG CIRCUIT
Number of I/O 51
RAM Size 5kB
Memory Type FLASH
Data Bus Width 8b
Supply Current-Max (Isup) 6.9mA
Max Frequency 5MHz
Number of UART Channels 2
Meter Type Single Phase
Measurement Error 0.1%
Voltage - I/O Low 0.8V
Voltage - I/O High 2V
Height Seated (Max) 1.6mm
Length 10mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 64-LQFP
Number of Pins 64
Weight 342.689036mg
Operating Temperature -40°C~85°C
Packaging Tray
Published 2013
Series Single Converter Technology®
Pbfree Code no
Part Status Discontinued
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 64
ECCN Code EAR99
Subcategory Other Analog ICs
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 3.3V

71M6541FT-IGT/F Overview


This package is packed in Tray. A package called 64-LQFP. It can also be used as a Single Phase meter. The following version of Surface Mount is available. Temperature at -40°C~85°C is extended during operation. Using a 3V~3.6V power supply, it operates as it should. A voltage of 0.8V is present on the low-level I/O ports of this PMIC. This device is capable of delivering voltages of 2V for high-level I/Os on its pins. 64 terminations are included in the part. ANALOG CIRCUIT IC with PMIC technology. The normal voltage required for the part is 3.3V. Devices such as this one require a voltage of 3V or higher to work. It is recommended that the maximum voltage that can be applied to the device should be kept below 3.6V. Logic gate applications are addressed by this 64 solution. There is no need for tools to install or dismount this device as it has been designed as a Surface Mount device. There is a Other Analog ICs for specialized needs in this case. A memory chip must have a voltage no greater than 6.9mA to work properly. It is included in the Single Converter Technology? series. This device can be supplied using 3.3V. Frequency ranges from 5MHz to X. The PMIC in this case has a memory size 64kB embedded in it. As far as memory management is concerned, the PMIC uses FLASH memory.

71M6541FT-IGT/F Features


Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.

71M6541FT-IGT/F Applications


There are a lot of Maxim Integrated 71M6541FT-IGT/F Energy Metering ICs applications.

  • Server Backplane Systems
  • Power monitoring/power budgeting
  • Central office equipment
  • Power monitoring instruments
  • Telecom Infrastructure
  • Subsystem Power Measurement
  • Intelligent Power Distribution Units
  • Industrial Equipment
  • PCs/servers
  • Telecommunications and data communications equipment

Write a review

Note: HTML is not translated!
    Bad           Good