Parameters |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Surface Mount |
YES |
Number of Pins |
100 |
Weight |
1.319103g |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2011 |
Series |
Single Converter Technology® |
Pbfree Code |
no |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
HTS Code |
8542.39.00.01 |
Subcategory |
Other Analog ICs |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Base Part Number |
71M6542 |
Pin Count |
100 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Interface |
I2C, UART |
Memory Size |
64kB |
Analog IC - Other Type |
ANALOG CIRCUIT |
Number of I/O |
51 |
RAM Size |
5kB |
Memory Type |
FLASH |
Data Bus Width |
8b |
Supply Current-Max (Isup) |
8.7mA |
Max Frequency |
5MHz |
Meter Type |
Single Phase |
Measurement Error |
0.1% |
Voltage - I/O Low |
0.8V |
Voltage - I/O High |
2V |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
71M6542F-IGT/F Overview
Packing in Tray. Packet 100-LQFP. An example of its use as a Single Phase meter would be the following. This item is available in Surface Mount. -40°C~85°C achieves a higher operational temperature. Using a 3V~3.6V power supply, it operates as it should. The following parts are also available on 71M6542 if you are interested in finding more. . Its low-level I/O ports are powered by a voltage of 0.8V. For high-level I/Os, this device presents a voltage of 2V. There are 100 terminations included in this part. An analog ANALOG CIRCUIT IC for PMICs. There is a normal voltage requirement for the part of 3.3V. This device may not be able to operate without a voltage of 3V or higher. As far as the maximum voltage that will be applied to the device is concerned, it should be kept below 3.6V. The 100 pins are connected by 100 pins. This is a 100-switched solution that can be used for logic gate applications. As a matter of fact, this is Other Analog ICs, which is the designation for specialized needs. A memory chip can only operate at a voltage of 8.7mA. It is included in the Single Converter Technology? series. The device can be supplied using 3.3V. There is no limit to the frequency that can be used by this device. A memory-sized 64kB is incorporated into this PMIC. The PMIC uses FLASH memory.
71M6542F-IGT/F Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6542F-IGT/F Applications
There are a lot of Maxim Integrated 71M6542F-IGT/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Real-Time Measurement of Input Power for AC/DC Supplies
- Central office equipment
- Base Station Power Distribution Systems
- Server Backplane Systems
- Power monitoring instruments
- Industrial Equipment
- Power monitoring/power budgeting
- Power Monitoring for Home Automation
- Telecom Infrastructure