71M6543F-IGTR/F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Single Converter Technology® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 71M6543 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 64kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 51 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 8.7mA |
| Max Frequency | 5MHz |
| Number of UART Channels | 2 |
| Meter Type | 3 Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
71M6543F-IGTR/F Overview
Packged in Tape & Reel (TR). An example of a 100-LQFP package is shown below. It is suitable for use as a 3 Phase meter. The following version of Surface Mount is available. Extended operating temperature at -40°C~85°C. 3V~3.6V power supply is used to power it. More similar parts can be found by searching 71M6543. The I/O ports on this PMIC have a voltage of zero on their low-level interfaces. High-level I/Os are represented by voltage 2V, while standard I/Os are displayed by voltage Y. Parts of the part are terminated with 100 wires. PMIC analog ANALOG CIRCUIT IC with high power. There is a normal voltage needed for the part, which is 3.3V. To be able to operate this device, the user should be aware that a voltage of 3V or higher is required in order for it to work. In order to keep the voltage at a reasonable level, the device's maximum voltage should not exceed 3.6V. It has 100 pins jointed. As a matter of fact, this is Other Analog ICs, which is the designation for specialized needs. Memory chips can't operate at a voltage greater than 8.7mA. As part of the Single Converter Technology? series, it is included. Using 3.3V, you can supply this device. There is no limit to the frequency that can be used by this device. A memory size of 64kB has been incorporated in this PMIC. As far as memory management is concerned, the PMIC uses FLASH memory.
71M6543F-IGTR/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6543F-IGTR/F Applications
There are a lot of Maxim Integrated 71M6543F-IGTR/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Base Station Power Distribution Systems
- Power monitoring instruments
- Power Monitoring for Home Automation
- PCs/servers
- Poly-phase energy meters of class 0.5S and class 1
- Industrial Lighting Power Monitoring
- Industrial Equipment
- Telecom Infrastructure
- Subsystem Power Measurement
