71M6543GT-IGT/F
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Weight | 1.319103g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2011 |
| Series | Single Converter Technology® |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 128kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 51 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 8.7mA |
| Max Frequency | 5MHz |
| Number of UART Channels | 2 |
| Meter Type | 3 Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | ROHS3 Compliant |
71M6543GT-IGT/F Overview
Packing in Tray. Package 100-LQFP. Using it as a 3 Phase meter is possible. Available in Surface Mount. The operational temperature at -40°C~85°C is higher. 3V~3.6V power supply is used to operate it. There is a voltage of 0.8V on the low-level I/O ports of this PMIC. This device displays a voltage of 2V for high-level I/Os. 100 terminations are included on this part. This PMIC ANALOG CIRCUITIC is powerful. The normal voltage required for this part is 3.3V. This device may not be able to operate without a voltage of 3V or higher. It is recommended that the maximum voltage that can be applied to the device should be kept below 3.6V. In this case, it is a 100 solution for logic gate applications. The device is designed as a Surface Mount device in order to make installation and dismantling as simple as possible. Specifically, this is a Other Analog ICs for specialized needs that needs to be taken care of. In order for the memory chip to function properly, the voltage must not exceed 8.7mA. You can find it in the Single Converter Technology? series. Using 3.3V, you can supply this device. It is possible to use this device at a frequency up to 5MHz. The PMIC in this case has a memory size 128kB embedded in it. FLASH memory is used by the PMIC.
71M6543GT-IGT/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
128kB adequate size for target applications.
FLASH memory.
71M6543GT-IGT/F Applications
There are a lot of Maxim Integrated 71M6543GT-IGT/F Energy Metering ICs applications.
- Power Monitoring for Home Automation
- PCs/servers
- General Purpose Energy Measurement
- Poly-phase energy meters of class 0.5S and class 1
- Real-Time Measurement of Input Power for AC/DC Supplies
- Industrial Equipment
- Power monitoring instruments
- Server Backplane Systems
- Power monitoring/power budgeting
- Base Station Power Distribution Systems
