71M6545T-IGT/F
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2016 |
| Series | Single Converter Technology® |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, UART |
| Memory Size | 64kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 60nA |
| Number of I/O | 29 |
| RAM Size | 5kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 6.9mA |
| Max Frequency | 5MHz |
| Meter Type | 3 Phase |
| Measurement Error | 0.1% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Weight | 342.689036mg |
| Operating Temperature | -40°C~85°C |
71M6545T-IGT/F Overview
Tray-packaged. The 64-LQFP package can be found here. It is also capable of being used as a 3 Phase meter. We have it in Surface Mount. Extended operating temperature at -40°C~85°C. 3V~3.6V power supply is used to power it. The I/O ports on this PMIC have a voltage of zero on their low-level interfaces. When using this device for high-level I/Os, the voltage presented by it is 2V. It includes 64 terminations. ANALOG CIRCUIT IC with PMIC technology. There is a normal voltage needed for the part, which is 3.3V. To be able to operate this device, the user should be aware that a voltage of 3V or higher is required in order for it to work. You should keep the voltage that goes to the device under 3.6V. For logic gate applications, this is a 64 solution. It is designed as a Surface Mount device for easy install and dismount. Specifically, this is a Other Analog ICs for specialized needs that needs to be taken care of. The supply current should be set to 60nA to keep the PMIC working normally. There is a maximum voltage that is allowed to be applied to the memory chip before it is allowed to operate. As part of the Single Converter Technology? series, it is included. It is possible to supply this device using the 3.3V protocol. As far as frequency is concerned, this device can operate up to 5MHz. 64kB is a memory size in this PMIC. In the PMIC, FLASH memory is utilized.
71M6545T-IGT/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6545T-IGT/F Applications
There are a lot of Maxim Integrated 71M6545T-IGT/F Energy Metering ICs applications.
- Central office equipment
- Subsystem Power Measurement
- Power monitoring instruments
- Industrial Equipment
- PCs/servers
- Real-Time Measurement of Input Power for AC/DC Supplies
- Intelligent Power Distribution Units
- General Purpose Energy Measurement
- Server Backplane Systems
- Power monitoring/power budgeting
