7200L12J8
| Parameters | |
|---|---|
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
7200L12J8 Overview
PLCC is the package in which FIFO memory chip is contained.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .FIFO consists of 32 terminations, which indicates that FIFO means is empty.Operation pins are 32 .FIFO design requires 80mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Currently, it has 32 pins.Normally, the component owns 5V power supplies.The gadget can also generate a value of RETRANSMIT .The clock of the FIFO memory IC runs at 50MHz frequency.
7200L12J8 Features
FIFOs category
Clock frequency of 50MHz
7200L12J8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L12J8 FIFOs Memory applications.
- Game Controller
- IP Camera Buffer
- Communications
- HDD
- Switches
- Laser Receiver System
- SPI Bus Flash Memory Devices
- Video Processing
- Magnetic memories
- Digital buffering
