7200L12JG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7200L12JG Overview
PLCC is a package that contains FIFO memory chip.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 32 terminations are contained within FIFO means.32 pin is used for operation.For its operation, 80mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.It has a total of 32 pins on it.In normal circumstances, the component has 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC is controlled by a clock with a frequency of 50MHz .
7200L12JG Features
FIFOs category
Clock frequency of 50MHz
7200L12JG Applications
There are a lot of Integrated Device Technology (IDT) 7200L12JG FIFOs Memory applications.
- Switches
- Code converters
- Rate buffers
- Data
- Video time base correction
- IP Radio
- Test Equipment
- Telecommunication
- Firmware loaders
- Game Consoles
