7200L12JG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7200L12JG8 Overview
The PLCC package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 32 terminations.As far as the operation pins are concerned, they are 32 pins.FIFO design requires 80mA amps of current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .This part has a memory type of OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.It is normal for a component to be equipped with 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .In this FIFO memory IC, the clock runs at frequency 50MHz .
7200L12JG8 Features
FIFOs category
Clock frequency of 50MHz
7200L12JG8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L12JG8 FIFOs Memory applications.
- Data communications
- Character generators
- Transistors
- SPD for DDR3 Memory Modules
- Fabrication Site
- Extended product-change notification
- Thermal Management for DDR3 Memory Modules
- Data-acquisition systems
- Controlled baseline
- Address mapping
