7200L12TP
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 28 |
| Weight | 4.190003g |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L12TP Overview
You can find FIFO memory chip in the PDIP package.It is recommended that memory IC be mounted in the Through Hole direction.When the supply voltage is 5V there is the possibility of high efficiency.I found that it has 28 terminations in FIFO means.FIFO design has 28 operation pins.There is a maximum current requirement of 80mA for its operation.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained in FIFOs .It has a type OTHER FIFO memory IC.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 28 pins on this FIFO memory IC.Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate RETRANSMIT .The FIFO memory IC runs at a frequency of 50MHz .
7200L12TP Features
FIFOs category
Clock frequency of 50MHz
7200L12TP Applications
There are a lot of Integrated Device Technology (IDT) 7200L12TP FIFOs Memory applications.
- Test site
- Smart Meter
- GPS Offender Tracking
- Wireless
- Laser Receiver System
- Game Consoles
- Firmware loaders
- Multimedia
- Computer networks
- Game Controller
