7200L12TPG
| Parameters | |
|---|---|
| Memory Width | 9 |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Length | 34.671mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 32B |
| Element Configuration | Dual |
| Max Supply Current | 80mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
7200L12TPG Overview
You can find FIFO memory chip in the DIP package.Bulk case is used for packaging.There is a memory of 32B on the FIFO chip that can be used to store applications and data.It is recommended that memory IC be mounted in the Through Hole direction.If the supply voltage is set to 5V , high efficiency can be achieved.I found that it has 28 terminations in FIFO means.These are the 28 pins for operation.There is a maximum current requirement of 80mA for its operation.In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , this gadget is self-contained.It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 28 pins on this board.The memory logic's maximum value is 50MHz for regular operation.A component normally has 5V power supplies attached to it.The gadget can also generate a value of RETRANSMIT .FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.
7200L12TPG Features
32B memory size
FIFOs category
Frequency at most
7200L12TPG Applications
There are a lot of Integrated Device Technology (IDT) 7200L12TPG FIFOs Memory applications.
- Extended product-change notification
- Data
- Switches
- SPD for DDR3 Memory Modules
- Game Consoles
- Medical Monitoring Device
- Firmware loaders
- Portable Information Devices
- Extended product life cycle
- Digital buffering
