7200L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7200L15J Overview
PLCC is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.A total of 32 terminations can be found in FIFO means.FIFO design has 32 operation pins.For its operation, 80mA is the maximum current required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.Currently, it has 32 pins.Normally, the component owns 5V power supplies.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.The FIFO memory IC's clock runs at a frequency of 40MHz .
7200L15J Features
FIFOs category
Clock frequency of 40MHz
7200L15J Applications
There are a lot of Integrated Device Technology (IDT) 7200L15J FIFOs Memory applications.
- Wireless
- GPS Offender Tracking
- Product traceability
- Game Controller
- IP Radio
- Consumer
- Rate buffers
- Medical Monitoring Device
- Tape controllers
- Data communications
