7200L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.0005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L15J8 Overview
PLCC is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V is capable of producing high efficiency.As a result of this, FIFO means contains 32 terminations.32 pin is used for operation.FIFO design requires 80mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.Low supply voltages, such as 4.5V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.In normal circumstances, the component has 5V power supplies.This gadget can also generate RETRANSMIT .There is 40MHz frequency set for the clock of the FIFO memory IC.
7200L15J8 Features
FIFOs category
Clock frequency of 40MHz
7200L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L15J8 FIFOs Memory applications.
- Routers
- Analog-to-digital converters
- Measurement Equipment
- Disk Controllers
- Communications Systems
- Video Processing
- Notebook
- Laser Receiver System
- Extended product-change notification
- Portable Information Devices
