7200L15JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Clock Frequency | 40MHz |
| Access Time | 15 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7200L15JI8 Overview
The PLCC package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains 32 terminations.FIFO design has 32 operation pins.In order for FIFO design to operate, a maximum current of 80mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 32 pins on this board.It is normal for the component to own 5V power supplies.It is also possible to generate RETRANSMIT using this FIFO memory.In this FIFO memory IC, the clock runs at frequency 40MHz .
7200L15JI8 Features
FIFOs category
Clock frequency of 40MHz
7200L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 7200L15JI8 FIFOs Memory applications.
- Character generators
- Battery Charger
- Telecommunication
- A/D output buffers
- Computer networks
- Application that requires re-writable nonvolatile parameter memory
- Game Controller
- Data communications
- Switches
- Seismic Data Collection at Extreme Temperatures
